Cable Head – Steel Encapsulated Cable
This tool creates a termination point for the Steel Encapsulated Cable (SEC) and gives an electrical connection to the tools that are being run in the well. Our SEC version of the Cable-Head has been designed to lock and seal directly on the capillary line. This Cable head comes with a shock-mounted dual activated disconnect, which serves as an emergency release in case the tools become stuck in the well. Dual Flapper Check Valves in the tool prevent any backflow up the coiled tubing. Tool sizes range from 1.750” (44.5mm) to 2.875” (73mm) OD in a wide variety of configurations.
The Lower Pack-off creates a chamber which allows the wireline to be terminated and connected to a standard electrical connection that is not affected by wellbore or pumped fluid. The Cable Head can be run in temperatures up to 302°F (150°C) and under pressure up to 10,000 PSI (70MPa).
Features & Benefits
- Especially designed for Steel Encapsulated Cable applications
- Temperatures rated to 302° (150°C)
- Pressure rated to 10,000psi (70MPa)
- Pump-through design
- Well Control
- Dual activated release tool
- Shroud is available to run with a camera to direct flow to end of camera